Create a magnetic wall with this large iron panel.
The panel has the same properties as a magnet-compatible whiteboard or slateboard, but is lighter, thinner and easier to install.
The whiteboard or slateboard wall plaque is a magnet holder that lets you turn your wall into a communication medium. You can write on it with felt-tip pen (for glossy boards) or chalk (for slate boards).You can also magnetise magnets on it.{PARAGRAPHE29}
Use
The panel is supplied unframed, rolled up in a large format cardboard box, and optionally with 6 x 5 mm holes for wall mounting.
Screw your magnetic panel to a wall or flat surface.
Write on it and attach your magnets and magnetic products.
This holder is compatible with all the magnets and magnetic rubber products you'll find on our site:
-{Lien106}
-{Lien117}
- Neodymium magnets and{Lien118}
- Accessories for{Lien119}
-{Lien120}
-{Lien121}
You can also use it as a photo holder, using{Lien122} or{Lien012} to stick on the back of your photos.Composition of the magnet-compatible plate
Choose from 10 colours and 2 sizes of magnet-compatible adhesive plates, square or rectangular.
PLEASE NOTE: depending on the colour you choose, the coating will be either dry-wipe or slate.
The plates consist of a 0.2mm-thick sheet of metal, surrounded by melamine resin and kraft paper impregnated with phenolic resin.Made in France
We laminate the adhesive, pre-drill and cut the plates in our workshop in the french alps
This magnet-compatible plate is available in sizes of 1.22m or 2.44m, 30.5cm or 61cm square or 2cm to 10cm for a length of 1.22m.
On request, we can print the file of your choice on these plates, or make a personalised cutout {Lien040} for any made-to-measure request.
We offer a {Lien123} of this large ferrous panel, on which we can print the file of your choice: logo, annotations, grid, etc.{PARAGRAPHE28}