Continuously magnetised, neodymium, double-sided magnetic bar. This bar is magnetised on both sides. It attaches to steel surfaces and can hold metal tools on the other side. You can move it and reposition it elsewhere.
This magnetic bar is very powerful: we use very powerful neodymium magnets along the entire length of the bar, which we insert into a hollow aluminium bar. Each magnet has a pull force of 9.9kg.
WARNING: Risk of bruising or pinching. We strongly recommend wearing safety gloves when handling the bar: it has an attraction range of approximately 20 cm.
Dimensions of the continuous magnetisation magnetic bar
Choose between 4 lengths: 12.5 cm, 25 cm, 50 cm or 1 m.
Height: 25 mm
Thickness: 10 mm
Thickness for discontinuous magnetisation bars: 15 mmAssembled in France
We cut the aluminium profiles to the dimensions of the bar and insert neodymium magnets. The ends of the aluminium magnetic bar are closed with resin caps.
Cutting and assembly are carried out in our workshop in Sassenage, near Grenoble. On request, we can produce neodymium magnetic bars of different lengths, or with pre-drilled holes for screwing.
{Lien050}for your customisable magnetic bar projects. Magnetic power of the continuous magnetic bar
Unlike most ferrite magnetic bars available on the market, we use neodymium magnets, which are extremely powerful in relation to their size.
These magnets are placed continuously or discontinuously along the entire length of the bar.
Neodymium magnets are magnets composed of an iron/boron/rare earth alloy, which is currently the alloy offering the maximum magnetic power.
Each magnet has a pull force of 9.9 kg and a slip force of approximately 1 kg. If you use this magnetic bar as a wall-mounted tool holder, the slip force is the reference point.
{Lien026}
